Antronix 2-way Splitter 5-1000MHz

the Antronix CMC4000H series digital splitter have been designed specifically for today’s two-way broadband networks. Low intermodulation distortion and high port-to-port return band isolation prevent high power cable modem signals from distorting neighboring port signals. Capacitively coupled F-ports block AC surges and prevent hum modulation. Additionally, our splitters are among the most robust in the industry. Every port on each CMC4000H series splitter can withstand 6 kV ring wave surges, while our proprietary ferrites remain ultralinear following several surges. To ensure years of reliable performance, Antronix’s splitters are encased in a zinc alloy diecast housing with tin plating. The splitter ports are sealed to 15 psi and are SCTE compliant. The CMC4000H series splitters guarantee consistent performance over time and temperature.

•  6 kV ring wave surge protected  All ports are protected against multiple 6 kV ringwave surges per IEEE specification C62.41Category A3
  

• -45 dBmV spurious and harmonics after 5surges of 6 kV ring wave with a +55 dBmV return signal Proprietary ferrite blend inhibits re-magnetization of the core due to voltage spikes from impulse noise or lightning. The ferrite remains ultra linear to prevent intermodulation where high level return carriers can affect forward path video signals.
  

• Digital broadcast and HDTV ready Compatible with existing and future networks
  

• Flat 1 GHz bandwidth with minimal insertion loss Supports present and future multimedia applications including video, data and telephony
  

• 35 dB return path output return Loss and 40 dB port-to-port return band isolation Excellent return path performance compatible with two-way digitally modulated networks
  

• Eclipse Contact Technology (ECT) F-port Provides 400% more contact surface area for lower contact resistance and higher reliabilit

• Capacitively coupled F-ports Protects against core re-magnetization and saturation while blocking AC surges.
  

• Zinc Alloy diecast housing and backplate w/ proprietary Nickel Alloy plating Superior corrosion resistant plating combined with a diecast backplate protects the back of the housing where corrosion is more prominent
  

• 100 % soldered back Ensures repeatable 120 dB RFI shielding
  

• 1 inch port-to-port spacing Flat 15 psi sealed, SCTE compliant F-ports Prevents water migration in to the splitter and ensures an excellent ground connection
  

• UV resistant label

• Integrated mounting tabs and heavy duty ground block for years of reliable service