S-A Continuum Chassis w/8 9825S Modulators DC

Continuum Headend Systems

Model 9800 Continuum NTSC Modulator System Complete with eight 9825S SAP/Stereo modulators, 9814 Controller and 9802 RIM (Rear Interface Module)  (-48 DC)

(1) S-A 9814 Controller PN 748030

(1) S-A 9802  RIM PN 546200

(8) S-A 9825S Stereo Modulators

Introduction

The Continuum  Headend System product family provides users with a vertically-oriented, compact, full featured ensemble of headend functions. The Model 9811 and 9814 Controllers manage all activities between application modules in addition to supporting external monitoring and control.

 Description

All Continuum configurations require one controller and its corresponding rear interface module per chassis. The Model 9811 and 9814 Controller Modules support all chassis level

functions required by any combination of application modules. A controller and its Model 9801 or 9802 Rear Interface Module (RIM) provide access to vital system connections

such as AC or DC power input, all back-up connections, Transmission Network Control System (TNCS) connections, and alarm interfacing. The controller also directs setup and

control of all application modules. Model 9811/9814 Controller Modules are required to take advantage of the additional features and capabilities of the Continuum Series 9825 Modulators. The Model 9811/9814 controllers are fully compatible with all versions of Continuum Application Modules and can be used in place of Model 9810/9813 Controller Modules if required. Note: Existing Model 9810/9813 Controller Modules need not be upgraded to Model 9811/9814 Controllers unless Continuum Series 9825 Modulator Modules are present in that respective chassis. However, Model 9810/9813 Controllers can be upgraded to Model 9811/9814 Controller compatibility if necessary. Contact Scientific-Atlanta

factory service for details.

 

Features

Controller:

- Model 9811 Controller supports AC and DC powering

- Model 9814 Controller supports dual DC (-48 V DC) powering

- Expanded memory for new Model 9825M and 9825S Modulators

- Supports all Continuum Headend System application modules

- Microprocessor control and configuration

- Front panel remote terminal access (RS-232)

- 57.15 mm x 25.40 mm (2.25 in. x 1 in.) LCD display for all configuration and control functions

- Supports application module automatic back-up

- Plug & Play capability

- Universal AC powering with DC back-up input or dual DC powering

- Power factor corrected AC power supply

- Mechanically improved connector system

Rear Interface Module

- Interface for universal AC powering (100-240VAC 50/60Hz) with DC back-up input or dual DC powering

- Back-up bus access supports external back-up control and large back-up groups (more than eight application

modules) with TNCS

- Provides SMC access to all application modules in the chassis (RS-485 and TTL)