The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies utilize switch-mode technology to achieve high power density in a low profile chassis. Utilizing unique packaging techniques, the DCS Family provides continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits. This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant-voltage/current mode operation. The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/local programming and preview status of voltage, current and OVP setpoints. Options include an internal IEEE-488/RS 232 interface (Option M9C), isolated analog programming of voltage and current (Option M51A), and the multichannel slave interface
•Output Voltage
Voltage ranges from 0-8 VDC to 0-600 VDC; current levels from 1.7A to 350A
•Power Density
•1 kW or 1.2 kW of power in a 19 lb. package only 1.75 ”high
•3 kW of power in a 33 lb. package only 3.5 ”high
•Input Voltage
•1 kW or 1.2 kW: 100-132 VAC, single phase, or 200-250 VAC, single phase, 47-63 Hz (other inputs available)
•3 kW: 190-250 VAC, three phase or 200-250 VAC, single phase 47-63 Hz (2.5 kW max with single phase input; other inputs available)
•Remote Programming
•Selectable remote programming for voltage, current and OVP
•Optional internal IEEE-488/RS 232 Interface Card with voltage and current readback and adjustable OVP (Option M9C)
•Optional isolated analog programming (Option M51)
•Optional multichannel slave interface (Option M85)
•Regulation
•Line regulation: 0.1%
•Load regulation: 0.1%
•Software LabVIEW® driver for M9C/M85 can be downloaded at no cost at www.elgar.com
•Regulatory Compliance CE Mark on all models, FCC Part 15 Class A and CSA 22.2 #220 (1 and 1.2 kW only)
Sorensen DCS60-18E
